EL's Case Analysis Study Example | Topics and Well Written Essays - 500 words

EL's Analysis - Case Study Example The changes included increasing the activities of the group and opening up store in new markets such as Asia and increasing the exposure in Europe (Richard Ivey School of Business, 2012). One main advantages of implementing the new strategies is the fact that the group increased its competitive advantage. Other luxury companies such as Hugo and Armani have in their strategies other activities such as accessorizing their clients. Additionally, these companies have worldwide store and distribution channels. By implementing these strategies, Elie Saab ensured that their clients have a variety of services to choose from. Additionally, increasing their market and distribution stores to Asia and Europe increased their sales significantly (Richard Ivey School of Business, 2012). This was observable in the sales recorded in 2008 in which for the first time Asia recorded percentage sales in its products (Richard Ivey School of Business, 2012). Elie Saab also benefits in the implementation of the new strategies by the fact that their contacted with other organizations before increasing its market exposure. This enabled the organization to share the risks that may be generated in the new markets. Additionally, contracting with other organizations ensures the group generates fresh ideas thus maintaining market relevance. The decision to brand valuable products with the organizations logo was crucial in ensuring the brand retains its originality (Richard Ivey School of Business, 2012). Venturing in to new markets exposed the company to numerous risks that may have long terms effects on the organization. Before implementing the new strategies, Elie Saab focused its attention small and limited stores in the Middle East, America and Europe. Additionally, Saab focused on creating high profiled clothing, Haute Couture. With the new suggestions, the organization seeks to increase its creation of ready to wear clothing which

Human psyche Essay Example for Free

Human psyche Essay The urge to compete is a large part of the human psyche. When this sense of competitiveness is taken to the extreme, a war may erupt. Throughout the history of humanity wars have been waged, even before the advent of writing, when poets where there to capture their essence. The epic poem The Iliad by Homer describes a war that took place almost two thousand, seven hundred years ago. The Greek society in which Homer lived was considered more violent than any in existence today. This gave him all the inspiration needed to create an epic war poem. By revealing to the reader the futility and horror of war, Homers Iliad offers an excellent critique of society, more specifically the fragility of human civilization and the savagery of human nature, when under the extreme pressures of combat. This masterful piece of literature, although written in many centuries ago, has much insight on ancient Greek society that can still be applied, with a modern twist, to todays world. The style Homer used in his epic poem was unconventional and highly successful. Compared to many other novels or poem of its time, as well as most modern pieces of literature, The Iliad is much longer. This both helps and hinders the texts ability to convey the messages and meanings of war. In order to capture and preserve the audiences interest during such a long poem, Homer took the reader on adventures beyond the Trojan battle field and into the life of each individual solider. By doing this, the reader feels drawn into the story and shares the horrors and futility the Greeks faced during the Trojan War. A large part of Homers work is dedicated to war and battle scenes. The main reason for this is because many believed Greek society, which took place seven hundred years before Christ, was brutally violent. Fighting was an everyday occurrence and brought honour among the warriors. The Greek gods did not dissipate the violent society; in fact they encouraged it by demanding animal s acrifices as part of daily rituals. It is this bloodlust, along with Homers original style, that has made The Iliad popular and highly influential to this day. War stories depict, through their graphic imagery, the horrors and tragedies taking place during a battle and The Iliad is no exception. The Iliad is most effective at portraying the futility and horrors of war throughout the text with all the gory details. Homer does an excellent job at capturing the realism of each battle scene in over five thousand lines of prose, nearly one third of the poem. As critic Martin Muller points out in Fighting in the Iliad the poet and his audience like such [battle] scenes and their periodic occurrence require no greater motivation then bar-room brawls in a Western. The following quote illustrates Homers ability to evoke graphic images during a battle:  The shaft pierced the tight belts twisted thongs,  piercing the blazoned plates, piercing the guard  he wore to shield his loins and block the spears,  his best defense-the shaft pierced even this,  the tip of the weapon grazed the mans flesh,  and dark blood came spurting from the wound. (pg149, p2) This quote gives the reader a clear image of what is happening as the shaft wounds the unfortunate soldier. Homer also adds to the horrors of the war by telling us about the history of each individual solider before their death. With about two hundred and fifty names in the text, all with individual stories behind their life or death, the story may become murky but never unemotional. Many times a character will be introduced only to be killed off within the same chapter. This adds to the death, destruction and ultimately the horror of the war the Greeks and the Trojans are fighting. As well as reminding the reader of the horrors of war, Homer tells of the futility of fighting such a bloody battle. The sense of frustration and futility of the war is clearly sown as the Greeks fight the Trojans for more than nine years on end. With war comes death, a fact that resounds throughout the Iliad:  While Euchenor knew that boarding the ships for Troy  meant certain death: his father told him so  time and again the strong old prophet said that  hed die in his own halls of a fatal plague  or go with the ships and die at Trojan hands. (pg362, p3) In this quote, describing the life of a solider before he is killed, we see that his efforts during the war appear pointless. He could have met a similar dishonourable death by staying home and enjoying his life. Death represents the futility of fighting a war because it is the only guaranteed result. Monarch Notes tells that since death is a constant presence in life we may better see how men value their lives when they are close to that presence. Homer does an excellent job of bringing the reader down to the battle so that the futility of war can be closely felt.

Energy Efficient Operation of Three Phase Induction Motor

Energy Efficient Operation of Three Phase Induction Motor Energy Efficient Operation of Three Phase Induction Motor Using DELSTAR Converter for Machine Tools Abstract DELSTAR converter is an electronic system to be interfaced with the existing STAR DELTA starter for machine tools. Induction motor consumes more power while it is operated at DELTA mode for a long time under no load condition. The proposed system gives the solution for the above stated problem. When the load on the motor is less than 40% of full load, it switches the motor to operate in STAR mode to save energy. When the load increases beyond 40%, it automatically switches the motor to operate in DELTA mode. The starting regimen is not disturbed. The proposed converter is recommended for applications where load changes are not too fast (not more than 120 times/hour). This can be used with any capacity motor by choosing appropriate current transformers (C.Ts) and setting the current level using the potentiometer built in. Keywords DELSTAR converter, machine tools, energy saving, current transformers Introduction Lathes will perform as many operations like face, turn, neck, taper, drill, bore, spin, file, polish, hone, buff, knurl, cut internal and external threads and cut off work. Relatively hard materials are handled by a metal lathe. For repetitive production of parts, turret lathes and capstan lathes are used. Induction motor of several HP is coupled with turret lathe and CNC machines too. Induction motors draw higher currents during their starting operations than is the case under full load running conditions. In the early days Direct-on-Line have been used. The short duration inrush currents, greatly exceeds the Starting currents. Complex starting methods to reduce Starting currents is compromised by other inrush currents [1], [4]. Induction motors are started normally with direct on line, but when large motors are started with D.O.L. starter, due to starting surge current, the supply line voltage is disturbed. To limit the starting surge current, reduced voltage is given to induction motors at start and then have full supply voltage when they run up to near rated speed. Comparison between the different starting methods of induction motor in terms of power quality is to figure out the reliable starting method which has the less power quality problems [5]. Efficient torque/current characteristics are provided by STAR-DELTA, industries prefer STAR-DELTA starters for their application. The large amounts of losses which occur at low speeds determine the users given by the wound rotor only for starting. The losses specific to the additional rotor resistor are quite important [3] while analyzing the performance of the induction motor. Industries will operate three phase induction motors at delta connection mode since machine runs very efficiently when the machine under fully loaded condition. When the motor is loaded less than 40% of the full load, it runs under inefficient energy zone. So, the induction motor will consume more power from the supply side during partially loaded condition. In order to compensate the power consumption, the motor load is virtually added by connecting stator winding from delta mode to star mode. If the load on the motor is increased above 40% of full load current, winding connection automatically changes from star to delta for efficient operation. Figure 1 Block diagram of proposed system System Analysis Existing System Motor draws more current than the full load at the time of starting, resulting in burnout of motor winding and / or starter. When DOL starter is used, because of high starting current, there is a big voltage dip in the electrical installation and therefore DOL starter is not suitable for higher rating squirrel cage induction motors. Significant energy wastage results reduced motor life. The system which exists is starting current reduction and the starters at the time of start of motor is star-delta starter. The STAR-DELTA starter is used at the time of starting only, not under running condition. The starter may be operated semi-automatically or fully-automatically. The semi-automatic operation is done by the push button switch. Fully-automatic starter is built with the timer which is used to change the STAR to DELTA connection after some predefined time. The both types of STAR-DELTA starter changes the winding connection from STAR to DELTA, and it is not possible to change the windi ng connection from the DELTA to STAR during running of induction motor. This problem is overcome by employing proposed starter with induction motor which changes the winding connection during both starting and running condition. 2.2 Explored Technology The proposed converter (refer figure 1) is to change the winding connection from STAR to DELTA and vice versa at the running condition of the induction motor. The switching process is done according to the load variation of the motor at particular instant. The construction of the converter is also similar to the starter with the small modification in the circuit. It is an automatic converter and the automatic process is made by the microcontroller. In the ancient system, there is no microcontroller available. Any one of the phase is taken for the current sensing using current sensor. The sensor circuit continuously senses the load variation in the motor and the output is produced according to the variation of load. When the load on the motor is less than 40% of the full load rated current, the controller activates the STAR connected contactors, so that the motor can run at STAR connection. When the load on the motor is above 40% of full load rated current, the controller activates th e DELTA connected contactors, so that the motor can run at DELTA connection. The converter accurately operates for the pre-setting value of the current sensor. If the motor load current reaches to 41% of the full load rated current the converter switches the motor from STAR to DELTA. And, if the motor load current comes 39% of the full load current, the converter switches the motor from DELTA to STAR. The converter can sense the current continuously so that the losses are reduced by maximum amount. Moreover, the converter can also be used as the starter. System Specification Hardware units are split into many sub units and each unit requires power supply to energize the circuit. Figure 2 Power supply circuit for relays and microcontroller +12V SPDT relay and +5V SPDT relay were used here. So that relay requires +12V supply and +5V also for microcontroller unit. The LM7812 and LM7805 are the voltage regulators which is used to regulate the output voltage of the bridge rectifier in Figure 2. Then the output is again filtered with the capacitor. +24V power supply is used to energize the sensor unit. The current is sensed with the help current transformer with buffer unit to adjust the current setting. This circuit is designed with the help of LM317k voltage regulator in figure 3. Figure 3 Circuit diagram for sensor unit motor Above the preset value, the transistor operates and relay gets energized so that microcontroller switches the operation into DELTA mode. Microcontroller switches the operation into DELTA mode. The conversion process takes minimal time in milli seconds and give accurate change over from STAR to DELTA and vice versa. ULN2003 is a driver which drive the signal input from current sensor to the microcontroller and also the STAR and DELTA contactor. The analog output from the microcontroller is not suitable to operate the +12V relay. So the analog output of the microcontroller is changed from the +5V to +12V with the help of driver unit (refer Figure 4). The microcontroller is to control the switching of STAR or DELTA relay while the motor is under the running condition. When the load is current is below the predefined value, the controller will energize the STAR contactor and if the controller input is high, it will activate the DELTA contactor. The input and output are enabled in the same port of the microcontroller. The pin 2 is enabled for STAR and the pin 3 is enabled for DELTA. The mode of operation is displayed in the Liquid Crystal Display. XTAL1 and XTAL2 are the input and output respectively of an inverting amplifier which is used as a crystal oscillator in the frequency range of 1.2 MHz to 12 MHz. The RESET circuit is connected with the microcontroller in pin 9 (refer Figure 5). Figure 4 ULN2003 driver circuit Figure 5 Circuit diagram of controller unit The output of the relay driver is given to the relay coil for energizing. The output of the relay driver unit is either 0V or 5V. The relay is connected in 15th pin of the driver IC. So, whenever the output of the relay is +5V then the star contactors will be activated. The delta unit is also used to connect the motor with the converter part. Figure 6 Circuit diagram of star contactor The output of the delta relay driver unit is either 0V or 5V. So, whenever the output of the relay is +5V then the delta contactor will be activated. Figure 7 Circuit diagram of delta contactor With the help of the above arrangements, the contactors change the winding connection from STAR to DELTA and DELTA to STAR simultaneously while the motor is under running condition. The LCD display unit will display the motor running condition and also the load current. LEDs are used to indicate the status of the relays. Experimental Results The converter is tested with 5HP squirrel cage induction motor by conducting simple brake test in laboratory. The power factor is fairly good in delta mode compare to the star for the same current values of the motor. The performance of the induction motor is good in delta connection but only when the motor is under fully loaded condition. Under no load or partially loaded condition, the motor operated in inefficient zone since machine consumes more energy than star mode. The table given below proves that the converter can improve the efficiency of the motor at the same time; it can reduce the energy consumed by the motor significantly. TABLE I Energy Saving Data For A 5 HP Motor Load Current in Amps. Power Factor Output Power in Watts Volt Amps Delta Star Delta Star Delta Star Delta Star 3.7 0.8 0.17 0.23 367 128 2140 532 4.4 0.95 0.15 0.24 476 165 3025 641 4.7 1 0.15 0.34 545 233 3177 673 4.8 1.4 0.28 0.65 866 606 2961 887 5 2.1 0.43 0.80 1240 986 2922 1231 5.5 2.7 0.53 0.85 1741 1493 3298 1735 6.3 5 0.71 0.86 2691 2559 3661 2918 The tests conducted on a 5 HP motor with a full load current of 7.9 amps, the energy savings on no load is 65.3%, reduction in operating current is upto 79.4%, reduction in demand 78.8% and improvement in power factor 60%. Figure 8 Characteristics of Motor (Star Delta) Discussions And Future Developments This work concluded that the star delta converter is very useful for all the kind of three phase induction motors from smaller rating to the larger rating, the converter can be designed accordingly. In the present days, the starters only used and it has low sensitivity. If the automatic star delta star converter is replaces the starter, the performance and life time of the motors will be increased. Since the converter can be operatable at the running time of the motor it reduces the losses in switching and during operation. The converter is designed with the small hardware units and it is very easy to install with the motors. Cost wise also the converters is very economical. This converter will reach the market with cheaper cost soon and reduces the energy consumption. References P. C. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of Electric Machinery and Drive Systems, 2nd ed. Piscataway, NJ: IEEE Press, 2002. D. Gritter, D. Wang, and T. G. Habetler, Soft starter inside delta motor modeling and its control, in Proc. IEEE-IAS Annu.Meeting, Oct. 8-12, 2000, vol. 2, pp. 1137-1141. Williams, A. Jack., Griffith, M. Shan, Evaluating the Effects of Motor Starting on industrial and Commercial Power Systems, IEEE Transactions on Industry Applications, 1978, Vol. IA-14, No. 4, pp. 292-305. Larabee, J., Pellegrino, B., Flick, B. Induction motor starting methods and issues, Industry Applications Society 52nd Annual Petroleum and Chemical Industry Conference, 2005, pp.217-222. Phillip W. Rowland, Low Impact Motor Control with Star-Delta Starting, IEEE Annual Textile, Fiber and Film Industry Technical Conference, 1998, pp. 10/1 10/9. Austin H. Bonnett, The Benefits of Allowing for Increased Starting Current in AC Squirrel Cage Induction Motors, IEEE Transactions on Industrial Applications, 1991, Vol. 27, No.6, pp. 1169-1174. Chapman S.J., Electric Machinery Fundamentals, 4th ed., Australia: Mc Graw-Hill, 2005, pp. 380-472. AUTHORS BIOGRAPHY PREMKUMAR Mcompleted his Bachelor of Engineering in Electrical Electronic Engineering in Sri Ramakrishna Institute of Technology, (SRIT), Coimbatore -641010, India. He also completed his Master degree in Applied Electronics in Anna University of Technology, Coimbatore, India. Currently, pursuing his Ph.D. in Anna University, Chennai. The author has presented many Technical Papers in various National International Conferences. Currently, he is working as an Assistant Professor in Electrical Electronics Engineering. His field of interest is Electrical machines, embedded systems, Renewable energy resources, Robotics, Electrical drives Control and Power electronics. SOWMYA R received her B.E. in Electrical and Electronics Engineering from Saranathan College of Engineering, Tiruchirappalli, India in 2013 and M.Tech. in Energy Engineering from National Institute of Technology, Tiruchirappalli , India, in 2015. She worked as an Assistant Professor/ Dept. of Electrical and Electronics Engineering in KPR Institute of Engineering and Technology, Coimbatore, India for the academic year 2015-2016. She is currently working as an Assistant Professor/Dept. of Power Engineering in GMR Institute of Engineering and Technology, Rajam, India. Her research interest includes control systems, Electric vehicle and Renewable Energy.

The Great Gatsby :: essays research papers

The movie created by David Merrick as well as the novel written by F. Scott Fitzgerald, both entitled The Great Gatsby, ate truly two fine pieces of art. The movie version shows the viewer what is happening in the story without internal comments from the narrator and the viewer can understand exactly what is happening without any intellectual thought involved. The novel, however, challenges the reader to look deep inside the writing in order to grasp the true effect of the novel and what kind of meaning is being portrayed. The novel also challenges the reader’s creativity and imagination. It lets the reader explore the character’s personalities in their own special way and the reader can relate these personalities to real life. The novel also allows the reader more freedom that the move, in the way that it lets the reader shape their own opinions of the different characters. As a person watches the movie version, all the characters are laid out for them and every detail of the character is seen, yet in the novel the character is described fully and it is up to the reader’s imagination to picture what the character looks like as well as the emotions conveyed by this character in the novel. The novel version of The Great Gatsby is a definite piece of art and clearly challenges the reader both intellectually and imaginatively to understand the words that describe the character accurately. Therefore the novel The Great Gatsby by F. Scott Fitzgerald is still the best representation of the Romantic Hero and his American Dream, despite efforts by interpreters like David Merrick in his film version to "usurp" it, for the author challenges the reader’s imagination through his brilliant narrative technique, unforgettable characterization, and use of symbolism, so that Gatsby’s experience becomes everyone’s. The novel is told in the perspective of a single character, Nick Carraway. Nick is an innocent and simplistic character and when the story is conveyed through this type of character it usually is told truly, and without any outside influence from the other characters in the plot. Nick’s telling of the story is taken from his first hand accounts on how he sees the story unfold, straightforward and in the order that it occurs without confusion. Nick is a very moralistic man and his morals, and also his values, are positively genuine. His heart is filled with compassion, especially for Gatsby and the events that surrounded Gatsby’s death as he was one of three people that were at this great man’s funeral.

Different Reasons People Comunicate Essay

There are lots of reasons why people communicate at work. For example, to share ideas and thoughts, to express needs and feelings, to socialise, to gain and share information, to build relationship and to maintain relationship, to understand and to be understood and to receive instructions, to give encouragement and show others that we care. In order to work effectively with children and their families, it is important to have good relationship with a range of people. Those who have good communication skills are likely to have strong relationship with children, parents and other adults. Sometimes we need extra support and services to help people comunicate properly. Translation and interpreting services – I know about few cases at school where teachers had to use translator services to facilitate written communication between parents whose English is an additional language. In addition, they may use interpreting services to facilitate spoken communication. Read more:  Identify five different reasons why people communicate  essay For sensitive matters should be used a professional interpreter as they have trained to translate the message but not misinterpret it. They have also been trained not to say their opinion or change the nature of what the other person is trying to say. Speech and language services – we may need to use these services to help us find ways of communicating with children and young people. They may provide suggestions and guidance as to how to use resources such as Picture Exchange Communication System (PECS) or training in visual systems such as Makaton. They showed up to be very efective with children with autism and down sindrome as many more. Advocacy services – a child or young person might be assigned an advocate whose task is to reflect their best interest. The use of advocates is needed for children or young people who are in local authority care or for children or young people with communication difficulties. Third sector organisations – for example, Royal National Institute for Deaf People (RNID) – we may use these services if we have children in the setting who are hearing impairment. These services provide training courses and consultancy on deafness and disability. They also offer communication services including sigh language, interpreters and provide services for deaf and hard of hearing people with additional needs. We need to find ways of communicating with children and build relationship with them so they find it easier to settle into a new environment. When parents find that their children are happy with us they will trust us and have total confidence in us. Comunication is a key in my job role as a Nanny so I can fullfill needs of children and than pass all details to parents, so they ll know, their child is happy and safe. I use to do it thru comunication books or during the handower at the end of the day. To work effectively we will need to gain and share information. This might be from basic information about how a child is feeling, what they are interested in or it might be information about their long-term health and welfare. In nurseries and schools for teams to work well together, it is important that relationships within them are strong and professional. The quality of relationships with colleagues can be disturb or threatened by the way they tallk to each other, react to their suggestions and the tone of the voice that they use. When relationships break down in professional teams, children, young people and their families are likely to receive a less effective service as this would afect them all. Friendly comunication in work place helps building loyalty and trust, they are aware of the needs of the children and job is done properly.

Professionals Paid To Much

Ever since contracts began in professional sports the price of athletes has continued to rise. So why are athletes worth so much? And where does all the money come from? It is all about the revenue, a team’srevenue determines how much they can pay their players. Athletes deserve their pay because they aresome of the hardest working people and are the cornerstone of a business that makes billions of dollars. ` ` Athletes are some of the highest people not only in the United States but possibly in the world. But it hasn’t always been that way.When contracts in professional sports first began athletes were barely making enough to pay for their meals. They were paid in the area of twenty dollars a week. Even though that was in the early 1900’s it still wasn’t much. And ever since the sports entertainment industry became popular around that time period salaries skyrocketed. For example, in the 1920’s legendary baseball player Babe Ruth earned more in one year than the president of the U. S. at the time. Since then athletes have been taking the money and running with it. ` ` Athletes are paid so much because they are the focal point of these multi-billion dollar industries.Their success determines the success of the wholeteam’sfranchise, and if the team doesn’t have any success they’ll be no money for anyone to make. Although it may not seem like it, professional athletes are some of the hardest working people around, not only physically but mentally as well. They put their bodies through vigorous training and deserve every penny they earn. Although anathlete’sseason is only a couple of months out of the year, they don’t just start getting ready a couple of weeks before the start of the season. They train year round to keep their bodies in shape. They work six to seven days a week for up to fifteen hours a day.Vacations are rare; they don’t get much time off, and they are always in the publi c eye, which can be quite stressful. They maintain their bodies so that they are able to compete at the highest level possible. They do this to ensure that when game time comes they are physically able to perform for the fans, which is their main goal besides winning, to keep ratings high and maintain their high priced salaries without question. ` ` Teams can afford to pay their players so much because the sports industry is a 90 billion dollar industry and athlete’s incomes are only five percent of that.This is so because as each team gains more and more success the value of that team goes up and when the team’s value is up, they attract more media attention which results in more fans. More fans means more money spent on tickets, team apparel, and concessions during the game. Sports are a form of entertainment, and when people are entertained they continue to be interested, and show their support by attending games or watching them on television or listening by radio: ` The beauty of it is that the service of sports can be consumed by more than one individual per unit time.Think about it, a stadium of people watching A-Rod consumes his service at the same time, which means his service is available to thousands of people in unison. Factor in television and you’ve got a service available to millions of people all at once (Reece). This is relevant becauseunlike athletes most jobs do not provide a service to millions of people so their not going to be paid as if they are. And since a team can provide a service to so many people they can pay their players as much as possible.` Unfortunately, sometimes teams do not always have the success they want from their players, and have to search for new ones to get the job done. So what can teams do to make them selves more likely to win? â€Å"Perhaps the primary way is to employbetter player talent† (Doc). Having better players improves your chances of winning, and winning leads to larger team r evenue, sothat better players can continue to be signed making the team much better. ` ` The effects of paying athletes too much can become an issue because athletes are realizing that they can earn more money than they ever thought could.Each time a player’scontract is up, they are either traded, released or renegotiate a new contract. Most of the time during negotiations athletes will demand more money than the team is willing to pay, because they know if they stick to what they want they will eventually get it. Players will go to extreme measures to obtain a sizeable contract, to the extent that they will holdout. Meaning they separate themselves from the team. Causing them to miss mandatory meetings, practices, and team functions, which are critical to a team’s success.Some holdouts even go into the sports season, causing them to miss games, all which the player is fined thousand of dollars for. When it goes as far as that, some players will start to criticize the team’s management in the media causing even more of a problem. These holdouts cause friction with team management, coaches, player’s and affect the team directly. This is why some believe that athletes are spoiled and undeserving of the money their paidand should not be looked up to. Anderson says that, â€Å"The off fieldbehavior of many athletes allegedly demonstrates that we should not be paying great sums of money to people who are not proper rolemodels for our children†. Anderson is one of many who feel that way about athletes, and will not be the last person to address the subject. ` Yes, professional athletes and actors are paid to much. Professional athletes and actors get paid a substantial amount of money for one game, or movie. While our men and women in the United States Military are struggling to feed their families.It is a sad commentary on our societal values that these entertainers are taking in seven million dollars a years or more. While teache rs, police officers, and firefighters make less than one percent of the income of some athletes and actors. Even if an athlete or actor is having a bad seaon they still recieve there contract ensured pay. Although some people would say, â€Å"There is a long and tough way towards becoming a great and the famous sports star or movie star. It not only requires persistent efforts but also talent. Few people on this field could accomplish great things like them.As a reward, they deserve a higher compensation. † On other hand, a Staff Sergeant (E6) in the United states Army makes an average of $28,285 a year. These are men and women on the front line difending our Country. They are not acting on a telivision show or playing a game. Professional athletes and actors should not be paid more than our men and women who fight for our Country. If a soldiers gets hurt his or her's pay is almost cut in half. If a professional athlete gets hurt they are still paid an overly substantial amou nt of money.When an actor gets sicks they will put the film they are making on hold. While the actor still is getting paid millions of dollars. The work professional athletes and actors do may be hard, but just for our entertainment it is not worth the price they a paid. The amount of money they make every year is ridiculous. Our soldiers do not get paid half of what an actor or a profession athlete do. In conclusion yes professional athletes and actors are paid to much. Now ill tell you why they should be payed so much. movie and sports stars certainly are under a great deal of pressure.The first pressure is that they are always at risk of injuries and also accidents. movie studios and sports teams get a large amount of money from their stars’s work. Filmmakers get money from the sale of movie tickets, while spectators have to pay money to watch a sports match. In fact, there is a high difference between the revenue of producer and the money that actors are paid. For example , Mission Impossible 4, a movie released in 2011, had grossed nearly $700,000,000 worldwide (Box Office Mojo Online). However, the main actor – Tom Cruise was paid only $12,000,000 (Statistic Brain Online, 2012).Not only that but also the star’s trademark brings a great deal of value to sponsors. Some stars become advertising tools of their teams or their companies, whereas some others share their royalty images with the owners. An example is that Cristiano Ronaldo, a soccer star, who gets $30 million each year in various endorsements, has to agree to a 6:4 split of this money with his club – Real Madrid (Jamie Sanderson, 2012). Therefore, if movie and sports stars thrust a lot of money on their managements, it will be not fair if they get paid less.